Chassis configuration: Dongfeng 12cbm compressed garbage truck, using Dongfeng Dolly card D9 series sanitation vehicle chassis, D9 series dedicated cab, flat head one row and half design, good view, hydraulic flip design, more convenient maintenance. Dongfeng Cummins 180 horsepower high-performance diesel engine, authentic country V emission standard, strong power, with Faster 8-speed gearbox, high transmission efficiency. Standard original air conditioner, direction assist, clutch assist, ABS anti-lock brake system, air brake, airbag seat, reasonable allocation and practicality.
Special configuration: Dongfeng 12cbm compressed garbage truck consists of a hydraulic mechanism consisting of a car body, a loading mechanism, a compression mechanism, a discharge mechanism, an oil pump, a cylinder, and a control valve. The car body material is high-quality carbon steel, thickness (unit: mm): side 4 bottom 4, car body volume: 12m3, the loading mechanism is composed of bracket, connecting rod mechanism, cam, hook and so on. Under the action of the oil cylinder, the garbage in the trash can is automatically turned over and poured into the hopper.
For the special part, the box can be made of square and curved. It is made of high-strength special volume plate. The thickness of the plate is more than 5mm. According to the wheelbase of the chassis, the actual volume of the box can reach 10-12 cubic meters. The hydraulic oil tank is located at the front of the cabinet and is equipped with a ladder to facilitate the addition and replacement of hydraulic oil. The fuel tank is equipped with a liquid level gauge, which is convenient for the staff to observe the amount of hydraulic oil at any time.
1.Semi-sealed bucket type
2.Hang bucket type
3.Swing arm type
4.Fully-sealed bucket type
The compression mechanism consists of a pressure plate welded by a steel plate and a channel steel, a guide wheel and a cylinder block, and the garbage in the hopper is compressed into the vehicle body under the push of the oil cylinder. Compression cycle time: 25-30s, compression density: 0.6-0.8t/m3. The unloading mechanism is composed of a discharge cylinder and a discharge push plate. The discharge push plate is formed by welding the steel plate and the bracket, and is positioned by the guide groove. The cylinder is pushed out to push the discharge push plate to discharge the garbage, and the garbage time is pushed and unloaded: 40s.